| Document |
|---|
| Configurable operation |
Group:
Document |
Add missing SPACE glyphs |
If an embedded font does not have a glyph entry for the SPACE character the missing glyph is added to the font. |
| Configurable operation |
Group:
Document |
Adjust array size for PDF/A |
Segment big arrays into multiple arrays in order to reduce the number of entries in each of the arrays. The number of entries is limited to 8191 in PDF/A. |
| Configurable operation |
Group:
Document |
Append string to file name after processing PDF |
Appends a string to file name (before the .pdf suffix, if present) of the PDF document after successfully processing it. This fixup is only being applied when used in batch mode or with a Droplet. |
| Configurable operation |
Group:
Document |
Apply ZIP compression to uncompressed stream objects |
Applies ZIP compression (called Flate in the PDF specification) to stream objects that are not compressed (excluding Metadata which should always be left as uncompressed plain text). |
| Configurable operation |
Group:
Document |
Convert TrueType fonts to CID |
Re-encodes a TrueType font into a CID based TrueType font. If the TrueType font contains a Differences array, it is removed when applying this fixup. Some ISO-based standards prohibit the use of Differences arrays. This fixup will only convert fonts that are embedded into the PDF file. |
| Configurable operation |
Group:
Document |
Convert fonts to outlines |
Converts fonts to outlines. |
| Configurable operation |
Group:
Document |
Discard embedded thumbnails |
Discards thumbnails embedded in PDF document. Embedding of thumbnails typically is not necessary anymore as Acrobat and Adobe Reader create them on the fly if they are needed. |
| Configurable operation |
Group:
Document |
Document options |
FEATURE_SetInitialViewDocumentOptionsComment_long |
| Configurable operation |
Group:
Document |
Embed Output Intent |
FEATURE_PDFXASetOIComment_long |
| Configurable operation |
Group:
Document |
Embed missing fonts |
If a PDF uses fonts which are not embedded into the PDF file they are embedded when using this fixup. It is required that the respective fonts are available in the operating system or in a specified folder. Some fonts may have a flag indicating that their licence does not allow embedding. In this case the fonts are not embedded into the PDF. |
| Configurable operation |
Group:
Document |
FEATURE_RemovePrivateDataTitle_long |
FEATURE_RemovePrivateDataComment_long |
| Configurable operation |
Group:
Document |
Fix font encoding (CIDSet) |
This fixup creates a CIDSet for font subsets as required by some ISO standards such as PDF/A. |
| Configurable operation |
Group:
Document |
Fix font encoding (CIDToGIDMap) |
This fixup sets a missing CIDToGIDMap to “Identity”. Some ISO standards such as PDF/A require that a CIDToGIDMap is present for all Type 2 CIDFonts. |
| Configurable operation |
Group:
Document |
Fix font encoding (CharSet) |
This fixup creates a CharSet for font subsets as required by some ISO standards such as PDF/A. |
| Configurable operation |
Group:
Document |
Fix glyph width information |
This fixup normalizes the glyph width information of the PDF and the fonts as required by some ISO standards such as PDF/A. |
| Configurable operation |
Group:
Document |
Insert CMap for CID fonts |
This fixup inserts CMaps for CID fonts if it is missing in the font. |
| Configurable operation |
Group:
Document |
Insert missing Type entry in StructElem objects |
PDF/A-1 requires that StructElem objects in a tagged PDF must contain a "Type" entry with a value of "StructElem". By applying this fixup the "Type" entry is added in all StrucElem objects in a PDF document as necessary. |
| Configurable operation |
Group:
Document |
Make font name unique |
This fixup adds a prefix to the names of embedded fonts. In that way problems with equal font names but different glyphs can be prevented. |
| Configurable operation |
Group:
Document |
Merge fonts with equal names |
This fixup merges fonts with the same name into one font. This can be useful to avoid problems when two or more subsets of the same font are present in a PDF. |
| Configurable operation |
Group:
Document |
Optimize the PDF for fast web view |
Optimizes the PDF for fast web view. Linearizes the PDF such that it can be served more quickly over the internet by a web server that supports byte serving. |
| Configurable operation |
Group:
Document |
PDF/A |
Convert to PDF/A |
| Configurable operation |
Group:
Document |
PDF/E-1 |
Convert to PDF/E |
| Configurable operation |
Group:
Document |
PDF/X |
Saves the PDF file in the respective PDF/X version - all objects and properties will be adjusted, e.g. transparency, layers will be removed, etc. |
| Configurable operation |
Group:
Document |
Prepare encoding entry in TrueType fonts for PDF/A |
Converts the encoding entry in TrueTypes fonts into a name object with the name of the encoding as its value as required by PDF/A. |
| Configurable operation |
Group:
Document |
Protect object level metadata |
Protects object level metadata, for example for images, against removal during processes like transparency flattening. |
| Configurable operation |
Group:
Document |
Recompress LZW as ZIP |
Recompresses any objects compressed as LZW into ZIP (internally called Flate). This is a completely lossless processing step that may be required if the PDF is to be converted to PDF/X or PDF/A (for which LZW is prohibited). |
| Configurable operation |
Group:
Document |
Reduce structure to predefined types |
Tagged PDF allows the use of custom structure elements. Some assistive devices though only support predefined standard structure elements. This fixup remaps custom structure elements to predefined structure elements. |
| Configurable operation |
Group:
Document |
Remove embedded files |
Removes embedded files to decrease the file size. |
| Configurable operation |
Group:
Document |
Remove job tickets |
Removes job ticket information embedded in a PDF document. |
| Configurable operation |
Group:
Document |
Remove object metadata protection |
Removes protection for object level metadata which has been inserted into a PDF file by using the fixup “Protect object level metadata”. |
| Configurable operation |
Group:
Document |
Remove, apply or adjust object compression |
This fixup applies one out of several object compression options: Object compression can be applied to just the document structure, the entire file, or it can be removed. PDF/X-1a, PDF/X-3 and PDF/A-1 prohibit the use of object compression. |
| Configurable operation |
Group:
Document |
Set PDF Version |
This fixup only sets the PDF version, but does not adjust any features in the PDF document. |
| Configurable operation |
Group:
Document |
Subset fonts |
Creates font subsets of fully embedded fonts to minimize the filesize. |
| Configurable operation |
Group:
Document |
Thumbnails |
Remove thumbnails |
| Configurable operation |
Group:
Document |
User interface options |
FEATURE_SetInitialViewUIOptionsComment_long |
| Configurable operation |
Group:
Document |
Window options |
FEATURE_SetInitialViewWindowOptionsComment_long |
| Document info and Metadata |
|---|
| Configurable operation |
Group:
Document info and Metadata |
Make document XMP Metadata compliant with PDF/A-1 |
PDF/A-1 imposes syntactical requirements for several document XMP Metadata fields, as well as consistency between Document Info fields and document XMP Metadata fields. |
| Configurable operation |
Group:
Document info and Metadata |
Make document XMP Metadata compliant with PDF/E-1 |
PDF/E-1 imposes syntactical requirements for several document XMP Metadata fields, as well as consistency between Document Info fields and document XMP Metadata fields. |
| Configurable operation |
Group:
Document info and Metadata |
Make document XMP Metadata compliant with PDF/X-4 |
PDF/X-4 imposes syntactical requirements for several document XMP Metadata fields, as well as consistency between Document Info fields and document XMP Metadata fields. This fixup is also compatible with other versions of PDF/X. |
| Configurable operation |
Group:
Document info and Metadata |
Remove PDF/A entries |
Removes all PDF/A specific entries from the document’s Metadata whose only purpose is to identify the PDF as a PDF/A file. |
| Configurable operation |
Group:
Document info and Metadata |
Remove PDF/E entries |
Removes all PDF/E specific entries from the document’s Metadata whose only purpose is to identify the PDF as a PDF/E file. |
| Configurable operation |
Group:
Document info and Metadata |
Remove PDF/X entries |
Removes all PDF/X specific entries from the document Info dictionary and/or the document’s Metadata whose only purpose is to identify the PDF as a PDF/X file. |
| Configurable operation |
Group:
Document info and Metadata |
Remove XMP Metadata if not compliant with PDF/A |
The PDF/A standard requires that all XMP Metadata entries are either predefined in the XMP specification or covered in an embedded XMP extension schema. This fixup removes all XMP Metadata entries that do not comply with the PDF/A specification. |
| Configurable operation |
Group:
Document info and Metadata |
Set Author entry |
Sets the Author entry for the PDF document |
| Configurable operation |
Group:
Document info and Metadata |
Set Creation date entry |
Sets Creation date to current date if it is empty. |
| Configurable operation |
Group:
Document info and Metadata |
Set Keywords entry |
Sets Keywords entry. Note: Any Keywords value already present will be overwritten |
| Configurable operation |
Group:
Document info and Metadata |
Set Modification date entry |
Sets Modification date to current date if it is empty. |
| Configurable operation |
Group:
Document info and Metadata |
Set Subject entry |
Sets the Subject entry for the PDF document |
| Configurable operation |
Group:
Document info and Metadata |
Set Title entry |
Sets the Title entry for the PDF document |
| Configurable operation |
Group:
Document info and Metadata |
Set Title entry to file name |
Sets the title for the PDF document to the file name |
| Configurable operation |
Group:
Document info and Metadata |
Set Trapped key |
Set trapped key to "True" or "False", if it is not already defined. |
| Configurable operation |
Group:
Document info and Metadata |
Set XMP Metadata fields |
Sets document XMP Metadata fields for the PDF document. Only simple property-value pairs are supported. |
| Configurable operation |
Group:
Document info and Metadata |
Set custom property |
Sets custom properties in the document’s Info dictionary. This fixup may consist of more than one key-value pair in order to set several custom properties at the same time. |
| Configurable operation |
Group:
Document info and Metadata |
Set document language entry |
Sets the language for a PDF document. This fixup may be useful to prepare PDF documents for conversion to PDF/A-1a. |
| Color spaces, spot colors, inks |
|---|
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Adjust dot gain |
Tone values of the specified objects can be adjusted by applying dot gain curves. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Alternate color space of spot colors |
Set alternate color space of spot colors to CMYK |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Conversion settings |
CCSettingsComment |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Convert NChannel to DeviceN by removing NChannel entries in a DeviceN color space |
NChannel is an extension to a DeviceN color space introduced in PDF 1.6 (Acrobat 7). It enhances color conversion and proofing for DeviceN color spaces but is neither supported in earlier versions of the PDF format nor by PDF/X-1a, PDF/X-3 and PDF/A-1. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Convert RGB colors using Quick Conversion (Office-RGB) |
The Quick Conversion method performs a tranformation of RGB colors to CMYK as specified in the PostScript Reference Language Manual. This type of conversion is often better for colors from office documents than the results of ICC based color conversions. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Convert Registration color to black |
Registration color (Separation All) can be converted to CMYK (100% DeviceCMYK), black as grayscale (100% DeviceGray) or to a spot color named Black (100% Separation Black). |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Convert colors using DeviceLink profiles |
DeviceLink profiles are especially intended to convert colors within one color model, e.g. to convert from one CMYK color space to another. The DeviceLink Add-on of pdfToolbox comes with a set of the most commonly needed DeviceLink profiles. The extended DeviceLink profile set of pdfToolbox Server/CLI can be configured in pdfToolbox plug-in to export a pdfToolbox profile for Server/CLI execution. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Destination |
CCDestination |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Embed Output Intent |
Embed a PDF/A, PDF/E and/or PDF/X Output Intent. This can be useful in a pdfToolbox 4 profile that converts a PDF document to a PDF/A, PDF/E and/or PDF/X file. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
FEATURE_RemoveICCbasedCMYKTitle_long |
FEATURE_RemoveICCbasedCMYKComment_long |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Knockout white vector and/or text objects |
Set white objects to knock out - white objects should usually be set to knock out, as otherwise they may simply disappear when the PDF is printed. In some cases though they are used to knock out process colors while overprinting spot colors. In this case this fixup should not be used. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Make HKS spot color names consistent |
Normalizes the spelling of HKS spot color names according to the HKS swatch color libraries. In addition problems where different HKS suffixes (e.g. "N" and "Z") are used for the same spot color are fixed. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Make Pantone spot color names consistent |
Normalizes the spelling of PANTONE spot color names according to the Pantone swatch color libraries. In addition problems where different Pantone suffixes (e.g. "C" and "U" for coated and uncoated paper) are used for the same spot color are fixed. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Make custom spot color names consistent |
Fixes problems where different spelling has been used for arbitrary spot color names. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Make spot color appearance consistent |
Unifies the appearance of spot colors in cases where the same spot color is specified more than once in a PDF, using slightly different representations in each case. With this fixup, the first occurrence of the spot is used. The fixup can be customized to ask at runtime which instance to use. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Map colors |
This fixup searches for a specified color and replaces it with a new color. When working within one color model (like from CMYK to CMYK) also single pixels of images can be mapped. Moreover intermediate values can be mapped, e.g. if there are lighter and darker gradations of a specific color. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Map spot colors |
Spot colors can be modified when applying this fixup. The name, alternate color space and overprint status of spot colors can be modified individually. Furthermore spot colors can be converted to CMYK. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Merge spot color name if appearance is identical |
Fixes problems where different spot color names are used for the same spot color appearance. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Normalize spot color appearance |
Adjusts spot color appearances to match those of the corresponding color definitions associated with this fixup. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Normalize spot color names |
Normalizes the spelling of PANTONE and HKS spot color names according to the Pantone or HKS swatch color libraries. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Overprint black |
Set black objects to overprint - for black objects it is often preferable that they are set to overprint. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Prepare colors for PDF/A-1 |
This fixup prepares the color in the PDF to meet the requirements of the ISO based standard PDF/A-1. All colors are made device independent. It is automatically ensured that the resulting file size is as small as possible. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Remove Black generation (BG) entry |
Black Generation (BG) entries affect conversion of RGB color (DeviceRGB) to CMYK process color and may interfere with the settings in an output device |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Remove ICC profile(s) from Output Intent(s) |
Remove ICC profile(s) from all Output Intents present in the PDF document without removing the Output Intents. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Remove ICC source profiles if identical to profile in Output Intent |
It is a provision of the PDF/X-4 standard that a PDF file must not contain any ICC source profiles identical to that in the PDF/X OutputIntent. This provision avoids the possibility of differing output depending on different implementations of PDF rendering. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Remove Rendering Intents |
This fixup removes all explicitly defined Rendering Intents. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Remove UCR |
Under Color Removal (UCR) settings affect conversion of RGB color (DeviceRGB) to CMYK process color and may interfere with the settings in an output device |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Remove all Output Intent(s) |
Remove all Output Intent(s) that are present in the PDF document. Removing an Output Intent can be a necessary step for repurposing a PDF/X or PDF/A file. It is also sometimes desirable to remove Output Intents if the file size must be reduced, for example if a low resolution version of a PDF is prepared for distribution over the internet. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Replace Version 4 ICC profile with older profile of same type |
Replace Version 4 ICC profile with older profile of same type |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Set ICC profile for Output Intent(s) |
Sets the ICC profile for the Output Intent(s) in the PDF document. At least one PDF/X or PDF/A Output Intent must already be present or must be established by a separate fixup for the same profile in which this fixup is used. If both a PDF/X and a PDF/A Output Intent are present, the same ICC profile will be associated with them. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Set Output Condition Identifier to Custom if missing |
Set Output Condition Identifier to Custom if missing |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Set Overprint Mode to 1 |
Sets the Overprint Mode to 1. Note that this will always only have an effect on DeviceCMYK vector, text or image mask objects that are already set to overprint, and for which at least one of the four CMYK channels is set to 0% for stroking or filling the object. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Set Overprint and Knockout |
Change overprint and overprint mode to define objects as knockout or overprint. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Set Rendering Intent |
Sets the Rendering Intent for all or selected objects, if applicable, based on current Rendering Intent settings. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Set halftone dictionary |
Defines the required values for a Type 5 halftone dictionary and applies the halftone dictionary to all page content in the PDF document. It is important to add entries in this fixup for all colorants. There is one sample fixup included in pdfToolbox 4 that can serve as a guidance. |
| Configurable operation |
Group:
Color spaces, spot colors, inks |
Set transparency blend color space |
Sets the transparency blend color space to the selected color space. It is also possible to make the blend color space simply compliant with PDF/X-4; this standard requires that the blend color space must not be identical to the one of the Output Intent. The blend color space should be set to DeviceCMYK instead. |
| Pages |
|---|
| Configurable operation |
Group:
Pages |
Auto-correct page geometry boxes |
Automatically corrects nesting of page geometry boxes (TrimBox or ArtBox, BleedBox, CropBox, MediaBox - in that order) if necessary. |
| Configurable operation |
Group:
Pages |
Crop all pages |
Crops pages to the bounding box of objects on each page. |
| Configurable operation |
Group:
Pages |
FEATURE_EnlargePageTitle_long |
FEATURE_EnlargePageComment_long |
| Configurable operation |
Group:
Pages |
FEATURE_MovePageContentTitle_long |
FEATURE_MovePageContentComment_long |
| Configurable operation |
Group:
Pages |
FEATURE_RemoveObjectsTitle_long |
FEATURE_RemoveObjectsComment_long |
| Configurable operation |
Group:
Pages |
FEATURE_ReplaceFontTitle_long |
FEATURE_ReplaceFontComment_long |
| Configurable operation |
Group:
Pages |
FEATURE_ScalePageContentTitle_long |
FEATURE_ScalePageContentComment_long |
| Configurable operation |
Group:
Pages |
FEATURE_ScalePageFormatTitle_long |
FEATURE_ScalePageFormatComment_long |
| Configurable operation |
Group:
Pages |
Flip pages |
Flips the pages horizontally or vertically. |
| Configurable operation |
Group:
Pages |
Remove empty pages |
Removes pages that do not have any marking objects in their page description. |
| Configurable operation |
Group:
Pages |
Remove objects outside page area |
Remove all page objects that are completely outside of the selected page geometry box. |
| Configurable operation |
Group:
Pages |
Remove page geometry boxes |
Removes the selected page geometry boxes from all pages in the PDF document. |
| Configurable operation |
Group:
Pages |
Remove page scaling factor |
Removes scaling factor entries from pages. Scaling factors (UserUnits) are specified in the PDF 1.6 specification for the first time. They are therefore not allowed in some ISO standards based on earlier versions of PDF. |
| Configurable operation |
Group:
Pages |
Rotate pages |
Rotates pages by the defined angle. |
| Configurable operation |
Group:
Pages |
Scale pages |
Scales all pages in the PDF. |
| Configurable operation |
Group:
Pages |
Set media box to origin |
Sets the MediaBox to the origin 0/0. The visual appearance of the PDF does not change. |
| Configurable operation |
Group:
Pages |
Set page geometry boxes |
Sets page geometry boxes either relatively to an existing page geometry box or to absolute coordinates. |
| Page contents |
|---|
| Configurable operation |
Group:
Page contents |
Adjust or remove Image Interpolate entry |
Adjusts or removes the Interpolate entry for images. |
| Configurable operation |
Group:
Page contents |
Always embed |
Define all fonts that always should be embedded |
| Configurable operation |
Group:
Page contents |
Apply or remove transfer curves |
Applies or removes transfer curves. |
| Configurable operation |
Group:
Page contents |
Complete width information for glyphs |
Complete width information for glyphs |
| Configurable operation |
Group:
Page contents |
Convert SMask to image mask |
Converts a soft mask (SMask) that does actually not use transparency into an image mask. Soft masks using transparency will not be converted. |
| Configurable operation |
Group:
Page contents |
Discard private data from other applications |
Removes private data stored in a PDF file by other applications. This fixup can help reduce file size substantially in certain cases but may affect features in other applications that rely on such private data. |
| Configurable operation |
Group:
Page contents |
Downsample/compress color images |
Downsamples, compresses or recompresses color images. |
| Configurable operation |
Group:
Page contents |
Downsample/compress grayscale images |
Downsamples, compresses or recompresses grayscale images. |
| Configurable operation |
Group:
Page contents |
Downsample/compress monochrome images |
Downsamples, compresses or recompresses monochrome images |
| Configurable operation |
Group:
Page contents |
FEATURE_EstablishUnicodeMappingTitle_long |
FEATURE_EstablishUnicodeMappingComment_long |
| Configurable operation |
Group:
Page contents |
Flatten layers |
Flatten layers |
| Configurable operation |
Group:
Page contents |
General Options |
Embed font |
| Configurable operation |
Group:
Page contents |
Increase line width |
Increases line width to a given value if current line width is below a given threshold. |
| Configurable operation |
Group:
Page contents |
Increase line width of multicolored lines |
Increases line width of lines using more than one color to a given value if the current line width is below a given threshold. |
| Configurable operation |
Group:
Page contents |
Make CID SystemInfo and CMap dict compatible |
Make CID SystemInfo and CMap dict compatible |
| Configurable operation |
Group:
Page contents |
Never embed |
Define all fonts that never should be embedded |
| Configurable operation |
Group:
Page contents |
Recompress JPEG2000 as JPEG |
Recompress JPEG2000 as JPEG |
| Configurable operation |
Group:
Page contents |
Reduce image bit depth |
Reduces the bit depth of 16 bit images to 8 bit. PDF/X-1a, PDF/X-3 and PDF/A-1a allow only a bit depth of up to 8 bit. |
| Configurable operation |
Group:
Page contents |
Remove BX...EX entries |
Removes BX...EX entries in page descriptions. BX...EX is sometimes used to bracket new page operators in order to establish a certain degree of backward compatibility with old PDF viewers. A PDF viewer may ignore page operators bracketed with BX...EX if it cannot support it. |
| Configurable operation |
Group:
Page contents |
Remove OPI information |
Removes OPI information. PDF/X and PDF/A prohibit the presence of OPI entries in compliant PDF documents. |
| Configurable operation |
Group:
Page contents |
Remove alternate images |
Removes all alternate images or alternate images not set as default for printing. |
| Configurable operation |
Group:
Page contents |
Remove embedded PostScript |
Removes embedded PostScript. PDF/X and PDF/A prohibit the presence of embedded PostScript in compliant PDF documents. |
| Configurable operation |
Group:
Page contents |
Remove flatness tolerance |
Removes value for the flatness tolerance. |
| Configurable operation |
Group:
Page contents |
Remove halftone information |
Removes halftone information from a PDF document. PDF/X only allows Type 1 and Type 5 halftones, with this fixup halftones other than these two can be removed specifically. |
| Configurable operation |
Group:
Page contents |
Remove printer marks |
Removes printer marks such as cut marks, registration marks, registration text, and color patches. This fixup requires a TrimBox in order to properly identify the printer marks. |
| Configurable operation |
Group:
Page contents |
Remove smoothness tolerance |
Removes any smoothness tolerance entries. Values for smoothness tolerance that are too high can lead to banding on a print output device even if that device supports smaller smoothness tolerances. |
| Configurable operation |
Group:
Page contents |
Set flatness tolerance |
Sets the flatness tolerance. |
| Configurable operation |
Group:
Page contents |
Set rendering mode for text |
Sets the rendering mode for text to the chosen number. Valid values are: 0 (fill), 1 (stroke), 2 (fill and stroke), 3 (invisible), 4 (fill and clip), 5 (stroke and clip), 6 (fill, stroke and clip), 7 (clip). |
| Configurable operation |
Group:
Page contents |
Set smoothness tolerance |
Sets the smoothness tolerance. |
| Interactive elements and properties |
|---|
| Configurable operation |
Group:
Interactive elements and properties |
Adjust or remove annotations |
Modify, move or delete annotations - some annotations or annotation properties are not allowed in PDF/A |
| Configurable operation |
Group:
Interactive elements and properties |
Adjust or remove form fields |
Adjusts, relocates, flattens or removes all or specific form fields. |
| Configurable operation |
Group:
Interactive elements and properties |
Change Launch Action into GoToR Action |
Changes actions of type Launch to actions of type GoToR. This is useful when converting to ISO based standards as some of them prohibit actions of type Launch. |
| Configurable operation |
Group:
Interactive elements and properties |
Generate form field appearance |
Generates form field appearance fo form fields that have the NeedAppearance flag set. |
| Configurable operation |
Group:
Interactive elements and properties |
Remove JavaScript not associated with actions |
Removes JavaScript which is not part of an action. |
| Configurable operation |
Group:
Interactive elements and properties |
Remove actions |
Removes actions. Note: PDF/X and PDF/A prohibit actions in PDF compliant documents. |
| Layers |
|---|
| Configurable operation |
Group:
Layers |
Adjust layers for PDF/X-4 |
PDF/X-4 and other PDF-based ISO standards such as PDF/X-5 require that layers (optional content) are used in a specific way to guarantee unambiguous rendering of a PDF/X-4 file that contains layers. |
| Configurable operation |
Group:
Layers |
Apply OCCD setup |
Applies an OCCD view setup that was saved using the Layer Explorer tool. |
| Configurable operation |
Group:
Layers |
Configure OCCD |
Optional content configuration dictionaries (OCCD) contain one or more layers and determine their visibility state. If the user selects an OCCD the visibility of all of the layers is switched to the defined state. This fixup allows the user to add or remove layers from or to OCCDs. Use the "+" button in order to add or remove layers. PDF/X-4 requires that if layers are present these are organized into OCCDs to make clear which ones are intended for output and which ones carry additional information. |
| Configurable operation |
Group:
Layers |
Create layer name for all layers without name |
Automatically names all unnamed layers using a sequential "Layer 1", "Layer 2" etc format. This allows for changing the visibility of layers which otherwise cannot be modified in Acrobat. |
| Configurable operation |
Group:
Layers |
Discard hidden layer content and flatten visible layers |
All objects on currently invisible layers are discarded and all layers, including visible ones, are flattened (removed from the document). |
| Configurable operation |
Group:
Layers |
FEATURE_RemoveLayerTitle_long |
FEATURE_RemoveLayerComment_long |
| Configurable operation |
Group:
Layers |
Make current visibility default visibility |
All currently visible layers are set to initially visible and all currently invisible layers are set to initially invisible. |
| Configurable operation |
Group:
Layers |
Put objects on layer |
All objects identified by the selected check are put on an existing or new layer. |
| Configurable operation |
Group:
Layers |
Set layer default to ON/OFF |
Sets default layer visibility when the PDF document is opened. Usually this is also the same as the initial visibility state of the layer, however the initial visibility setting can also be changed e.g. visible even if the default is OFF by using another fixup. |
| Configurable operation |
Group:
Layers |
Set layer initial export state |
Sets the initial export state of the defined layers. |
| Configurable operation |
Group:
Layers |
Set layer initial print state |
Sets the initial print state of the defined layers. |
| Configurable operation |
Group:
Layers |
Set layer initial visibility state |
Sets the initial visibility of the defined layers. Default behaviour is that layers are visible if they are ON. This may be changed so that they are e.g. visible even if their default is OFF by setting the initial visibility to “Always visible”. |
| Configurable operation |
Group:
Layers |
Set layer intent |
Sets the layer intent to either “View” or “Reference”. |
| Configurable operation |
Group:
Layers |
Set layer state to Locked/Unlocked |
Sets the defined layers to either locked or unlocked. |
| Configurable operation |
Group:
Layers |
Set layer visibility dependent on a zoom level |
Sets the selected layers to being visible only within the defined zoom range. |
